Our Pick: MakerMade M2 CNC Router
It scores 55/100 overall versus 52/100, winning 5 out of 7 comparison categories.
Benchmark Scores
Side-by-side score comparison across all five benchmark dimensions.
Overall
MakerMade M2 CNC Router
Pros
- Full 4x8 foot cutting area for sheet goods
- Improved chain tensioning over original Maslow design
- MakerMade provides commercial support and warranty
- Excellent for cutting cabinet parts and furniture pieces
- Vertical storage takes minimal floor space
Cons
- Very slow cutting speed compared to conventional CNC routers
- Accuracy degrades significantly at the edges and corners
- Limited Z-axis depth restricts to thin materials
- Requires building a large vertical frame
- Software can be finicky and requires patience to calibrate
Maslow CNC Router Kit
Pros
- Cuts full 4x8 foot sheets of plywood
- Extremely low cost for the work area size
- Active open-source community
- Small footprint -- hangs on a wall
- Great for furniture and large panel projects
Cons
- Very slow cutting speed
- Accuracy decreases at edges and corners of the work area
- Cannot cut thick or hard materials -- limited Z depth
- Requires building a frame from plywood
- Not suitable for precision work or small details
Verdict
MakerMade M2 CNC Router wins this comparison with 5 categories to 2.
It scores 55/100 overall versus 52/100, winning 5 out of 7 comparison categories.
Where to Buy
Support CNCRouterInfo by using our affiliate links.
MakerMade M2 CNC Router
$1198Maslow CNC Router Kit
$439As an Amazon Associate, CNCRouterInfo earns from qualifying purchases at no extra cost to you.
Frequently Asked Questions
What is the difference between MakerMade M2 CNC Router and Maslow CNC Router Kit?
The MakerMade M2 CNC Router ($1198) features a 900W spindle with a 1220×2440mm work area and a Hanging sled on vertical frame (frame built from plywood) frame. The Maslow CNC Router Kit ($439) features a 900W spindle with a 1220×2440mm work area and a Hanging sled on vertical frame (user-built from plywood) frame. Overall, the MakerMade M2 CNC Router wins more comparison categories.
Which is better value for money — MakerMade M2 CNC Router or Maslow CNC Router Kit?
The Maslow CNC Router Kit is $759 cheaper at $439 vs $1198. Our value scores rate the Maslow CNC Router Kit higher at 95/100.
Which router is easier to set up and use?
Based on our ease-of-use benchmarks, the MakerMade M2 CNC Router scores higher (42/100 vs 35/100). Both support MakerMade Ground Control, WebControl, Maslow Ground Control among other software options.